technical data sheet adaptor mini smp jack - jack 18K118-K04L5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany email: info@rosenberger.de www.rosenberger.de 1 / 2 rf_35/08.06/4.0 all dimensions are in mm; tolerances acc. iso 2768 m-h interface according to mil-std-348 mateable with gppo tm (gilbert engineering co., inc.) and ssmp tm (connectors devices, inc.) documents n/a material and plating connector parts material plating center contact cube aurodur?, gold plated outer contact cube aurodur?, gold plated dielectric ptfe
technical data sheet adaptor mini smp jack - jack 18K118-K04L5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany email: info@rosenberger.de www.rosenberger.de 2 / 2 rf_35/08.06/4.0 f(ghz) electrical data impedance 50 ? frequency dc to 65 ghz return loss ? 23 db, dc to 18 ghz ? 15 db, 18 to 50 ghz insertion loss ? 0.05 x db insulation resistance ? 5 g ? center contact resistance ? 6.0 m ? outer contact resistance ? 2.0 m ? working voltage (at sea level) 325 v rms (at 70000 feet) 125 v rms mechanical data mating cycles if mating part is smooth bore ? 500 if mating part is full detent ? 100 center contact captivation ? 7 n engagement force - smooth bore 11 n typical - full detent 19 n typical disengagement force - smooth bore 11 n typical - full detent 29 n typical environmental data temperature range -55c to +155c thermal shock mil-std-202, method 107, condition b vibration mil-std-202, method 204, condition a shock mil-std-202, method 213, condition a moisture resistance mil-std-202, method 106 climatic category iec 60068 55/155/21 rohs compliant tooling n/a suitable cables n/a weight weight 0.16 g/pce draft date approved date rev. engineering change number name date rong fang 19/07/06 b. aicher 03.03.16 d00 15-1674 fl. ?llerer 03.03.16 while the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warran ty on our part and no statement herein shall be construed as recommenda tion to infringe existing patents. in the effort to improve ou r products, we reserve the right to make changes judged to be necessary.
|
